Automatic Needle Punching Grinding and Chamfering Grinding Equipment

Model:

ZCMZ 500-1

Classification:

Chamferer

Dental needle machine

Message

189 3828 8084

Product Description

■Product Pictures

■Equipment Performance

The grinding wheel can automatically track the attrition compensation and automatically trims, correctsand smoothes the grinding wheel to ensure the precision and quality of the product. The grinding taper,inclination angle and length can be adjusted, and there is a reciprocating automatic grinding function, sothat the longer linear grinding taper can be achieved. Grinding products long, short adjustable, the endcan do grinding point, chamfering or polishing to puncture processing, grinding line diameter range,wide versatility. Effective diameter:0.5 mm ～10mm, effective line diameterlength:40mm～ 500mm, thegrinding equipment has automatic cleaning cycle safety prevention and automatic Operation DetectionWarning, alarm control system. Function and application: apply to all metal straight bar, such as iron, steel,stainless steel, copper, tungsten, ceramic, glass fiber, gold, silver, titanium and other metal and non-metalliclinear materials of the grinding point, grinding needle or end of the chamfer polishing debarking treatment.Products are widely used in aerospace, locomotive accessories, electronic appliances, electric shaft core,medical devices, precision instruments, toys, stationery, furniture and other precision hardware productsindustry. The equipment is simple, stable and efficient, is a new era of professional new energy-savinggrinding equipment.

■Equipment Model and Parameters

Type of equipment	ZCMZ 500-Itype	note
Grinding material	Metal/non-metal	Capillary tubes (hollow tubes) and others
Length of straight rod	40MM-500MM	Adjustable effective range
Straight rod diameter	φ0.5MM-10MM	A circular, equilateral diamond
Grinding cone length	1.0MM-50MMadjustable	According to the size of rod diameter* material toughness
Taper of grinding	1-45°	According to the size of rod diameter* material toughness
Efficiency of production	1-300the/min	According to the size of rod diameter* material toughness
Grinding wheel wear compensation	automatic	Set according to rod diameter* material toughness (rod)
Grinding wheel dressing	automatic	Automatic dressing with grinding wheel wear compensation
Automatic feed	There are	Automatic feed/feed/finish
Grinding function	There are	End, needle, taper tip, chamfering polishing, etc
Grinding function	There are	Linear reciprocating cycle(long cone tip)
Adjustment of taper	There are	The taper can be adjusted from O to 180 pulse points
Dust removal purification	There are	Cyclic dust extraction and filtration
Maximum output	1～99999999	Single order measurement
Maximum power	4kw	Main engine power
Degree of automatism	Fully automatic	Integrated control center
Model size	about131010601380mm	Length* width* height
Electrical source	AC:380V/50Hz	3P+N+PE
Heavy volume	about430kg	The whole machine

■Equipment Characteristics

1. With high efficiency, high quality, safety and energy saving, stable operation, suitable for material wirediameter, length range;

2. The feeding mechanism adopts independ ent stepless transmission, which can adjust the grinding speedaccording to the material and diameter of the corresponding processing to achieve the best grirding effect.

3. Feeding control is equipped with: single action/automatic operation mode, convenient manual grindingsampling, setting the best automatic grinding data.

4. The driving mechanism of the equipment can freely adjust the grinding wheel height and set the automaticcompensation value of grinding wheel according to the grinding wheel consumption of grinding products.

5. The machine is compact in structure and can adjust the Angle taper automatically according to the grindingAngle and dip Angle of the product.

6. The equipment has low technical requirements for the operator (can implement the operation managementof 1 person and multiple machines), reducing the process, saving manpower, improving efficiency and reducingcosts.

7. According to the grinding material process, the grinding wheel can be automatically tracked and compensated,and the grinding wheel can be automatically trimmed,corrected and repaired to ensure the best quality.

8. The active motor automatically tenses without adjustment. The grinding direction, speed and taper can beset freely according to the needs of the product and has the reciprocating automatic grinding function.

9. The equipment has total output (quantitative). Daily output (count) and early warning, alarm equipmentoperating failure and safety prevention system, and text display description.

10. The whole process is controlled by PLC program, and the man-machine dialogue Chinese touch-screeninterface operating system.

11. The device subverts the traditional equipment of the same kind and has the pioneering frontier of replacing the original product revolutionary.

Key words:

Dental needle machine

Chamferer

None

Message

Professional service team answers