Features and working range of fully automatic chamfering machine


Home all say chamfering machine, can you know? Automatic chamfering machine is suitable for metal pen tube, air conditioning tube, compressor tube tube and other tube end forming processing, mechanical transmission accuracy and stability, compact structure, reasonable layout, is the necessary supporting models of metal tube processing enterprises. Mainly through the use of mechanical transmission mode, the cut pipe fittings are placed in the hopper or vibration plate, and the machine is started to realize automatic feeding, automatic clamping, automatic flat head at both ends and inner and outer corners at the same time.

As a domestic enterprise, now to introduce our Zhangjiagang Runtai Machinery Company production of a new type of automatic chamfering machine main performance characteristics:

1. The inner and outer corners of the end face of the round pipe round bar can be chamfered and trimmer at one time, which is fast and accurate.

2. The center line of the processing object and the cutter head is accurate and unchanged. The cutter head is specially designed, the blade is standardized, and the adjustment of the blade is simple and fast.

3. Automatic feeding, automatic clamping, automatic advance and retreat knife, simultaneous processing of materials at both ends to ensure material length accuracy, fast speed and high efficiency.

4. To replace workpieces of different sizes, only simple cutter head and replacement clamping die adjustment are required. The length of non-standard machine table can be 3000mm, and the pipe diameter can be Φ100mm.

5. Processing speed 3-4 seconds/piece.

Related News


Installation and commissioning of chamfering machine

First, lift the fuselage from the center of the machine with a jack until the footing is slightly about 5cm from the ground, or unilaterally from the ground.


Features and working range of fully automatic chamfering machine

Home all say chamfering machine, can you know? Automatic chamfering machine is suitable for metal pen tube, air conditioning tube, compressor tube tube and other tube end forming processing, mechanical transmission accuracy and stability, compact structure, reasonable layout, is the necessary supporting models of metal tube processing enterprises. Mainly through the use of mechanical transmission mode, the cut pipe fittings are placed in the hopper or vibration plate, and the machine is started to realize automatic feeding, automatic clamping, automatic flat head at both ends and inner and outer corners at the same time.


What should be paid attention to in the operation of the machine tool?

The operator must be familiar with the performance and structure of the automatic double-head chamfering machine. As for the usage method, there are also matters needing attention, etc., which must be paid attention. Must strictly abide by the safe operation system, before the work, for the operator to strictly in accordance with the provisions of the implementation.


Chamfering accuracy and speed control range of chamfering machine

Chamfering accuracy of chamfering machine: it is generally required to be below ± 0.5mm for construction industry; However, it is required to be below ± 0.01mm for automobile reflectors;


What are the benefits of automatic straightening machine

Automatic straightening machine is a set of mechanical, hydraulic, pneumatic, electrical and measurement and control analysis as one of the high-tech products. The automatic straightening machine can straighten the shaft parts to obtain the ideal straightness or runout requirements.